產品展示
MELF METAL FILM PRECISION RESISTOR (CSRV SERIES)
MELF METAL FILM PRECISION RESISTOR (CSRV SERIES)
所屬分類 ：
無腳（晶圓）電阻
型號 ：
1003618390943555584
產品詳情
Recommend Land Pattern
Features
· AEC-Q200 Compliance.
· Thin film technology.
· Excellent overall stability.
· Sn termination on Ni barrier layer.
· Tight tolerance down to ± 0.1%.
· Extremely low TCR down to ± 10 PPM/°C.
· High power rating up to 1 Watts.
· SMD enabled structure.
· SMD enabled structure.
Applications
· Automotive.
· Industrial.
· Telecommunication.
· Medical Equipment.
· Measurement / Testing Equipment.
Construction
Dimensions (Unit: mm)
Technical Specifications
Automotive grade MELF resistor with AEC-Q200 qualified to meet automotive industrial standard. Advanced level for very critical environment.
Part Numbering
Pulse Withstanding Capacity
The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
Continuous Pulse
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the
limit of acceptance was a shift in resistance of less than 1% from the initial value.
Frequency behavior
Resistors are designed to function according to ohmic laws. This is basically true of resistors for frequencies up to 100kHz. At higher frequencies, there is an additional contribution to the impedance by an ideal resistor switched in series with a coil and both switched parallel to a capacitor. The values of the capacitance and inductance are mainly determined by the dimensions of the terminations and the conductive path length.
The environment surrounding components has a large influence on the behavior of the component on the printed-circuit board.
Lightning Surge
Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.
Standard Electrical Specifications
Derating Curve
官方微信
官方公眾號
電話 ：010-67882992 67892992 傳真 ：010-67882992 郵箱 ：taohua@znscout.com QQ ：55890894